Skip to content
Lid & Liner
Pull-Out & Slim Cans

The best under-sink pull-out trash cans

Measure the clear cabinet opening, not the cabinet, and measure the depth past the plumbing. That single mistake is behind most returns in this category.

By Ryder M. · Last reviewed September 27, 2026

Inside of a kitchen sink cabinet

Lid & Liner is reader-supported. If you buy through a link on this page we may earn a commission at no extra cost to you. It never changes which product we rank first — how we pick and how we make money.

The short answer

The simplehuman 35L dual under-counter can is the easiest to install well, because its track arrives as one pre-assembled piece rather than a bag of brackets. The Rev-A-Shelf 4WCSC is the one to fit in a kitchen you intend to keep, because it uses genuine Blum Blumotion slides.

#ProductBest forPrice
01
Pull-out trash and recycling bins inside a kitchen cabinet
simplehuman 35L Dual Compartment Under-Counter Pull-Out CanThe pull-out that is easiest to install and hardest to break: an all-steel frame on commercial ball-bearing tracks that arrive as one pre-assembled piece.
Best pull-out overall
02
Bottom-mount pull-out waste bins on soft-close slides
Rev-A-Shelf 4WCSC-1835DM-2 Bottom-Mount Double, 2 x 35 QuartThe version fitted with real Blum Blumotion heavy-duty slides — the same hardware that goes into high-end cabinetry.
Best slides
03
Steel-framed double pull-out waste container for a cabinet
Rev-A-Shelf 53WC-1835SCDM-217 Double Pull-Out, 35 QuartTwo 35-quart buckets on a steel frame with soft-close slides, and a door-mount kit so the cabinet door pulls it out.
Best steel-frame double
04
Single-bucket pull-out trash can in a kitchen cabinet
simplehuman 30L Under-Counter Pull-Out CanThe single-bucket version, for a household that recycles elsewhere and wants all the cabinet volume for trash.
Best single-bucket pull-out
05
Wire-frame double pull-out trash can kit for a cabinet
Rev-A-Shelf RV-18PSC-18-5 Soft-Close Double Pull-Out, 35 QuartThe common-as-dirt RV-series kit: two 35-quart bins on a bottom-mount soft-close frame, stocked by every major retailer.
Best value double
06
Replacement plastic waste containers for a pull-out frame
Rev-A-Shelf RV-35-52 Replacement Pull-Out Containers, 35 QuartReplacement 35-quart buckets, because a cracked bin is not a reason to rip out a working frame.
Best repair part

How we picked

  • The slides, first and by a distance. Two full buckets of trash on a pair of slides is a lot of weight moving a lot of times, and slides are where pull-outs fail. Blum Blumotion is the benchmark.
  • Frame rigidity. A wire frame flexes under two loaded buckets, and that flex is what walks the slides out of alignment over a few years until the drawer binds. A steel-panel frame does not.
  • Install difficulty. A pre-assembled one-piece track removes the misalignment that causes binding later. This matters more than it sounds if you are fitting it yourself.
  • Published minimum opening. The brands that state one are the brands you can buy confidently. We have listed the figures rather than estimating them.
  • Door mount or bottom mount. Door mount means one action instead of two, at the cost of fussier adjustment at install.
  • Whether replacement buckets are sold separately. The bucket cracks long before the frame wears out.

Methodology · disclosure.

The picks in full

Pull-out trash and recycling bins inside a kitchen cabinet

01 — Best pull-out overall

simplehuman 35L Dual Compartment Under-Counter Pull-Out Can

The pull-out that is easiest to install and hardest to break: an all-steel frame on commercial ball-bearing tracks that arrive as one pre-assembled piece.

Capacity
35 liters / 9.3 gallons, two buckets
Minimum opening
20" H x 10" W x 20" D
Tracks
Commercial-grade ball bearing, pre-assembled one-piece
Extension
Up to 3 feet
Liner codes
Codes G and D
Frame
All steel

Most pull-out kits arrive as a bag of brackets and a diagram. This one comes as a single pre-assembled track, which turns a two-hour job into a twenty-minute one and removes the misalignment that causes a pull-out to bind six months later. The tracks are commercial-grade ball-bearing and extend up to three feet, so the back bucket comes fully clear of the cabinet.

What we'd flag: the minimum cabinet opening is 20" high x 10" wide x 20" deep, and plenty of older sink cabinets fail the depth test because of the trap. Measure to the back wall, past the plumbing, before you order.

Bottom-mount pull-out waste bins on soft-close slides

02 — Best slides

Rev-A-Shelf 4WCSC-1835DM-2 Bottom-Mount Double, 2 x 35 Quart

The version fitted with real Blum Blumotion heavy-duty slides — the same hardware that goes into high-end cabinetry.

Capacity
2 x 35 quart
Slides
Blum Blumotion heavy-duty soft close
Mounting
Bottom mount
Minimum opening
15" W x 20-5/8" H

Slides are where pull-out bins fail, because they carry a lot of weight through a lot of cycles. Blum's Blumotion is the benchmark: heavy-duty, genuinely soft-closing, and serviceable. If you are installing this in a kitchen you intend to keep, this is the version to buy.

What we'd flag: the minimum cabinet opening is 15" wide by 20-5/8" high, which rules out a lot of 12-inch cabinets. Check the opening, not the cabinet's nominal size.

Steel-framed double pull-out waste container for a cabinet

03 — Best steel-frame double

Rev-A-Shelf 53WC-1835SCDM-217 Double Pull-Out, 35 Quart

Two 35-quart buckets on a steel frame with soft-close slides, and a door-mount kit so the cabinet door pulls it out.

Capacity
2 x 35 quart
Slides
Soft close
Mounting
Door mount
Frame
Steel

Door mounting is the detail that separates a good pull-out from an annoying one: you pull the cabinet door and the bins come with it, rather than opening a door and then pulling a separate frame. The steel frame will not flex under two full buckets the way a wire basket does.

What we'd flag: door-mount kits have to be adjusted carefully at install or the door sits proud of the run. Budget the extra fifteen minutes to get the brackets square.

Single-bucket pull-out trash can in a kitchen cabinet

04 — Best single-bucket pull-out

simplehuman 30L Under-Counter Pull-Out Can

The single-bucket version, for a household that recycles elsewhere and wants all the cabinet volume for trash.

Capacity
30 liters / 8 gallons
Frame
Heavy-duty steel
Tracks
Commercial-grade ball bearing
Liner code
Code G

A dual-compartment pull-out is the wrong product if your recycling goes into an outdoor crate — you end up with a half-size trash can for no reason. This gives you the full 30 liters in one bucket on the same heavy-duty steel frame and commercial ball-bearing tracks, hidden inside the cabinet.

What we'd flag: the same cabinet-depth constraint applies, and there is no way to add a second bucket later. Decide before you drill.

Wire-frame double pull-out trash can kit for a cabinet

05 — Best value double

Rev-A-Shelf RV-18PSC-18-5 Soft-Close Double Pull-Out, 35 Quart

The common-as-dirt RV-series kit: two 35-quart bins on a bottom-mount soft-close frame, stocked by every major retailer.

Capacity
2 x 35 quart
Slides
Soft close, bottom mount
Cabinet
Standard 18-inch
Replacement bins
Sold separately

There is a reason this is the one most kitchen fitters reach for — it fits standard 18-inch cabinets, the parts are widely stocked, and replacement containers are sold separately so a cracked bucket does not mean a new kit.

What we'd flag: a wire frame flexes under two full buckets in a way a steel-panel frame does not. Over years, that flex is what knocks the slides out of alignment.

Replacement plastic waste containers for a pull-out frame

06 — Best repair part

Rev-A-Shelf RV-35-52 Replacement Pull-Out Containers, 35 Quart

Replacement 35-quart buckets, because a cracked bin is not a reason to rip out a working frame.

Capacity
35 quart each
Fits
Rev-A-Shelf RV-series frames
Material
Plastic

The bucket cracks long before the frame or the slides wear out — usually at the handle cut-out. Replacement containers cost a small fraction of a whole kit and drop straight into an existing RV-series frame. This is the first thing to check before you price a replacement.

What we'd flag: confirm your frame is an RV-series before ordering. Other Rev-A-Shelf lines take different buckets, and the dimensions are close enough to be misleading.

What a pull-out costs you

Worth being clear-eyed about, because the appeal is obvious and the costs are not.

You gainYou give up
The can is completely out of sightThe cabinet — all of it
Odor is contained behind a closed doorCapacity: a 35-quart bucket is about 8.75 gallons
Nothing in the walkway or the floor spacePortability — it does not move house with you
It is right where you rinse and prepAn install, with screws into the cabinet
Sorting, if you fit a dualHalf the capacity again, per stream

The capacity point is the one that surprises people. A standard 35-quart pull-out bucket is roughly two thirds of a 13-gallon kitchen can, and in a dual-compartment unit each stream is about 4.4 gallons. You will empty it considerably more often. Whether that is fine depends on whether you compost or recycle separately — if you do, most of the volume has already left. The size arithmetic.

If the trade does not appeal, a narrow free-standing can keeps full capacity with no install, and if you rent, there are genuinely no-drill options.

Liners, and why overhang matters more here

In an open kitchen can, an overhanging bag is untidy. In a pull-out it is a functional problem: the excess catches on the cabinet frame every single time the drawer closes, and it tears — usually about a third of the way down, which is exactly where you do not want a tear.

Pull-out buckets are quoted in quarts and a standard 13-gallon bag is far too big for a 35-quart bucket. Your options are a smaller generic liner (8-10 gallon) or a liner cut to the bucket, which is what simplehuman's Code G is for. Fitted liners versus standard bags.

The fitted liner for simplehuman's under-counter buckets, and the standard bag to use if your pull-out is a Rev-A-Shelf — in which case buy the smallest size that reaches, not a 13-gallon.

Pack of small custom fit drawstring trash bags

Best for under-counter cans

simplehuman Code G Custom Fit Drawstring Trash Bags

The liner sized for simplehuman's under-counter pull-out buckets, where overhang is not just untidy but jams the drawer.

Box of 13 gallon tall kitchen trash bags

Best everyday bag

Glad ForceFlex Tall Kitchen Trash Bags, 13 Gallon

The standard ForceFlex: single-layer stretch film with a grip band that keeps the bag from sliding down the inside of the can.

Living with one

  • Check the cabinet floor when you change the bag. A closed cabinet has no airflow, so anything that leaks sits there. Wipe it occasionally — this is the commonest source of a smell people blame on the bucket.
  • Do not overfill. An overfull bucket catches on the cabinet frame on the way in, which is how the frame gets scored and the bag gets torn.
  • Keep the wet fraction out. Same rule as anywhere, more so in an unventilated cabinet. A countertop caddy or the freezer.
  • Tighten the slide fixings after six months. They loosen with use, and a loose slide is what starts the misalignment that eventually makes the drawer bind.
  • Price a replacement bucket before a replacement kit. The bucket cracks at the handle cut-out long before anything else wears out. Hardware and spares.

Common questions

What is the best under-sink pull-out trash can?

The simplehuman 35L dual is the easiest to install well, because its track comes pre-assembled as one piece. The Rev-A-Shelf 4WCSC with Blum Blumotion slides is the one to fit if you are keeping the kitchen.

Will a pull-out trash can fit under my sink?

Measure the clear opening and the depth to the trap, not the cabinet's nominal size. simplehuman states a minimum of 20" H x 10" W x 20" D for its 35L dual; Rev-A-Shelf's 4WCSC needs 15" W x 20-5/8" H.

How much capacity do you lose with a pull-out?

A 35-quart bucket is about 8.75 gallons, so roughly a third less than a 13-gallon can. In a dual-compartment unit each stream is about 4.4 gallons. Expect to empty it noticeably more often.

What bags fit a pull-out trash can?

An 8-10 gallon liner for a 35-quart bucket, or a liner cut to the bucket like simplehuman's Code G. A 13-gallon bag overhangs badly, and in a pull-out the overhang catches on the cabinet frame and tears.

Door mount or bottom mount?

Door mount means the cabinet door pulls the bins out with it — one action instead of two, but the brackets need careful adjustment or the door sits proud of the run. Bottom mount is more forgiving to fit.

Do pull-out trash cans smell?

A closed cabinet contains odor better than an open kitchen but has no airflow, so anything that leaks sits there. Check and wipe the cabinet floor occasionally — that is usually the source rather than the bucket.

Sources

Every specification on this page traces to one of these, checked at the time of writing. Where a manufacturer does not publish a figure, the page says so rather than estimating it.

Read next